Nikola Tesla Books
Books written by or about Nikola Tesla
ONE-HALF KILOWATT TRANSFORMER OUTFIT 95 D.C.C. copper magnet wire, wound in a single layer upon a cardboard cylinder 6 in. in diameter and 8 in. long. In either end of each cylinder, a wooden head is affixed. The details of the cylinders and heads are given in Fig. 12. After winding the cylinders, the layer of wire should be given five coats of shellac, each coat being dried out thoroughly before the next is applied. The secondary discharge rods are shown in detail in Fig. 11, together with the clips which hold the ball on the 4 POST-FIBRE-8REQ 4 TURNS 4TURNS 4 PRIMARY I REQ. - BALL CLIP - 2 REQ. - (8 112 DISCHARGE ROD-2 REQ. Fig. 11. Details of primary, primary support, ball clip, and discharge rod
